Pack 89's
PUBLIC SITE
Home Page
Car Derby Rules
Online Books
Boat Rules
Rocket Rules
Forms
Camps
Google Calender
Definitions
Camping Rules Info
About the uniform
Patch Placement
Websites
Leadership


 
Cub Scout Pack 89
(Kennett, Missouri)
 
ScoutLander Contact Our Pack Member Login
  
 

Car Rules




Pinewood Derby Car Rules

CAR SPECIFICATIONS

1. Maximum width - 2-3/4"

2. Maximum Length - 7"

3. Maximum Weight - Not over 5.000 Ounces

4. Maximum Height 4" (to fit under the finish gate).

5. Minimum width between wheels - 1-3/4

6. Minimum bottom clearance underneath the body - 3/8" (to operate properly on the track).

7. Minimum Front Nose Width shall be at least 0.5” and parallel with the front axle (to operate properly on the track).

RULES

1. Each Participant may only enter one car. The car should be built for the current year of competition and not raced in previous years.

2. The Cub Scout must be present for the car to compete.

3. A car can be modified between the Pack, District and Council race but should be the same car.

4. Use only Official BSA Grand Prix Pinewood Derby Kit wood, wheels and nails. Any cars or parts bought off Ebay, at Hobby Lobby or any other place that alters the original parts will be disqualified.

5. Wheels may only be lightly sanded to smooth out molding imperfections in the tread area. Beveling, tapering, thin sanding, wafering or lathe turning of the wheels is prohibited.

6. Motors, engines or other propulsion may not be used. The car must be free-wheeling, with no starting devices. Magnets and slip weights are prohibited.

7. Wheel bearings, washers and bushings are prohibited.

8. Axles must be placed in the original axle grooves. The grooves may be modified slightly as necessary to square with respect to the body but must retain the original wheel base and placement front and back. 9. Cars can be designed to run in either direction.

10. Axles cannot be grooved, or otherwise altered beyond light sanding to remove any burrs.

11. No aftermarket wheels or axles are permitted.

12. Only dry lubricant is permitted. No Liquid.

12. Details such as fenders, steering wheel, a driver and decals are permissible as long as these details do not exceed the width, length, height, clearance and weight specifications. All details must be securely attached to the car.

13. All Cub Scouts may race.

14. NO Glue on axles.

15. All  four Wheels must touch the track at once.

DAY OF EVENT

1. Each car must pass inspection by the official inspection committee before it may compete. If, at registration, a car does not pass inspection, the owner will be informed of the reason for failure, and will be given time within the official weigh-in time period to make the adjustment.

2. The car will be impounded after registration, inspection and weigh-in. You will not be allowed access to your car until the end of the event.

3. Race officials may authorize repairs when damage is caused by collision with another vehicle or object. Repairs must be completed within a limited time allowed by the Race Officials.

4. Sportsmanlike conduct is expected at all times. Unsportsmanlike conduct will not be tolerated.

5. If a car leaves the track in two (2) consecutive races, it is disqualified. EXCEPTION: When a car is caused to leave the track because of a collision with another car.

6. All Decisions Made By The Race Officials Are Final!